Overview

AMERICAN SYSTEMS is seeking an experienced Senior Engineering Technician Level V in Pascagoula, MS. Join our team supporting on-site Hull, Mechanical & Electrical (HM&E) engineering and technical services for DDG 51 Class Flight III new construction ships. This position is integral to ensuring the successful delivery and operational readiness of the next generation of Surface Combatants.

Responsibilities

As a Senior Engineering Technician Level V, you will:

Technical Support:

• Research technical requirements, availability, and alternatives for spare parts and assemblies for ship systems and equipment; provide actionable information to end users.
• Deliver updates and revisions to technical documentation concerning installation, testing, operation, and maintenance of ship systems and equipment.
• Support updates related to Engineering Operational Sequencing System (EOSS), Technical Manuals, and Planned Maintenance System (PMS).

Crew Coordination:

• Assist in crew familiarization processes including, but not limited to: preparation for AEGIS Light Off (ALO), Main Engine Light Off (MELO), Ship Trials, Counterpart Services, Crew Move Aboard (CMA), Damage Control Material Assessment (DCMA), Light Off Assessment (LOA), and Crew Certification Phases 1 and 2.
• Integrated Logistics Support:
• Provide technical reviews of System and Equipment Integrated Logistics Support (ILS) elements as directed by NSWCPD.

Lifecycle Services:

• Support full life-cycle activities for DDG 51 Class ships, focusing on Flight III specific systems.
• Additional Duties:
• Experience with shipboard corrosion control is highly valued, especially performing corrosion control inspections and/or holding AMPP CIP inspector certification.

#LI-EW1

Qualifications

• Graduate of a high school, trade, industrial, or correspondence school with credits in algebra, plane geometry, trigonometry, and physics.
• Minimum of five (5) years practical experience in responsible engineering duties.
• At least five (5) years progressive experience involving design, operation, maintenance, and testing of Surface Combatant Class Naval ship systems and equipment.
• Five (5) years direct, hands-on experience with major construction milestones and Combat Support Systems testing for Surface Combatants at Building Yard and/or Homeport locations.
• Preferred Qualifications:
• Experience in shipboard corrosion control (inspections and/or AMPP CIP certification) is highly desirable.
• Familiarity with DDG 51 Class Flight III equipment, systems, and operational procedures.

Qualified candidates are encouraged to apply and support the U.S. Navy’s mission to deliver advanced maritime capability for future generations.

Pay Transparency Statement

AMERICAN SYSTEMS is committed to pay transparency for our applicants and employee-owners. The salary range for this position is USD $77,600.00/Yr. - USD $129,600.00/Yr. Actual compensation will be determined based on several factors permitted by law. AMERICAN SYSTEMS provides for the welfare of its employees and their dependents through a comprehensive benefits program by offering healthcare benefits, paid leave, retirement plans, insurance programs, and education and training assistance.

EEO Statement

EEO Race/Sex/Disability Status/Veteran Status

Trescal is a growing company, looking for new talent to join our organization! We are the premier independent calibration, repair, and asset services provider in the U.S. We provide our customers single-source, cost-effective, best-in-class solutions.

We have a great opportunity for a well-rounded and highly motivated Calibration Technician to join our team. This is a traveling position based around the Fort Walton Beach area with a Mobile Calibration Laboratory. Additional travel outside the area is typically in the state of Florida and the adjoining regions. Click the link below to see our mobile lab.

Check Out Our Mobile Calibration Team Here!

In this role you will:

• Perform calibrations on medium to high level test and measurement instrumentation
• Calibrations will be performed on-site at customer locations in one of our Mobile Calibration laboratories and as needed, in a fixed site calibration lab.
• Travel to service our customers in the Southeast. Travel might be by air or ground transportation depending on the customer location.
• Use your troubleshooting, repair, and calibration knowledge to work on unique equipment
• Be responsible for customer satisfaction on all equipment and services
• Create and verify calibration data sheets for technical content and accuracy based upon specifications and approved procedures

Requirements

As a Calibration Technician you must possess:

• Military (PMEL OR TMDE) training OR a technical associates degree OR equivalent work experience.
• Minimum of two years of experience calibrating test & measurement equipment in a commercial or military calibration laboratory.
• Experienced in calibrating several disciplines of test and measurement equipment including but not limited to: Physical Dimensional; DC/Low frequency; RF Microwave.
• Working knowledge of ISO/IEC 17025 requirements.

And we would prefer:

• Knowledge of ANSI / NCSL Z-540 and ISO 9000
• Experience using Calibration software such as: LabView, SureCal, Met/Cal, etc.

Benefits
We believe people are the most important part of every business, which is why we offer more than just great health insurance plans at a great rate. At Trescal, we have a strong track record of retaining our employees by providing challenging work experiences, learning and development opportunities, and a success oriented collaborative environment.

In addition, we offer paid time off, a 401k plan, career development opportunities, referral bonuses, and a competitive benefit package, including these company paid benefits:

• Dental
• Vision
• Employee Assistance Program
• Basic Life/AD&D Insurance
• Long Term Disability Insurance
• Short-Term Disability Insurance.

We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, disability or veteran status.

#INDTUS

Trescal is a growing company, looking for new talent to join our organization! We are the premier independent calibration, repair, and asset services provider in the U.S. We provide our customers single-source, cost-effective, best-in-class solutions.

We have a great opportunity for a Calibration Technician to join our growing Mobile Calibration Services group! Our Mobile Calibration Technicians perform calibrations within our Mobile Calibration Lab and cover the areas of force, pressure, torque, temperature, infrared thermometry, dimensional, DC, and low frequency. Technicians will also perform equipment maintenance as necessary and participate in internal audits and proficiency testing. This is a traveling position based around the Western Carolina area within our specialized, Mobile Calibration Laboratory. Additional travel outside the area is typically in the Mid-Western to Southeast Regions.

Click here to check out our Mobile Calibration Lab in action!

Are you someone who loves to travel? Then this role is for you! Enjoy 4- and 5-star hotels, generous daily per diem rate is paid for all over-night stays, and other perks!

RESPONSIBILITIES:

• Perform calibrations on medium to high level test and measurement instrumentation
• Calibrations will be performed on-site at customer locations in one of our Mobile Calibration laboratories and as needed, in a fixed site calibration lab.
• Travel to service our customers in the Midwest and Southeast. Travel might be by air or ground transportation depending on the customer location.
• Use your troubleshooting, repair, and calibration knowledge to work on unique equipment
• Be responsible for customer satisfaction on all equipment and services
• Create and verify calibration data sheets for technical content and accuracy based upon specifications and approved procedures

Requirements

• Military (PMEL) experience or two years of a technical associates degree
• Minimum of 7 years of commercial or military laboratory experience
• Strong knowledge of metrology practices and theories, analog and digital circuit analysis,
• Experienced in some or all of test and measurement equipment used in conjunction with the repair and calibration of electronic, mechanical, acoustical, chemical, thermal and/or dimensional devices,
• Possess strong troubleshooting and repair capabilities, and the ability to work on unique equipment with little or no product information,
• Proficient in Windows-based and laboratory automation software,
• Ability to apply basic statistical techniques necessary for measurement uncertainty analysis,
• Working knowledge of ISO/IEC 17025 and ANSI/NCSL Z540-1 requirements,
• Skilled in communication with customers and peers, including the ability to mentor and train.

BENEFITS:

We believe people are the most important part of every business, which is why we offer more than just great health insurance plans at a great rate. At Trescal, we have a strong track record of retaining our employees by providing challenging work experiences, learning and development opportunities, and a success oriented collaborative environment.

In addition, we offer paid time off, a 401k plan, career development opportunities, referral bonuses, and a competitive benefit package, including these company paid benefits:

• Dental
• Vision
• Employee Assistance Program
• Basic Life/AD&D Insurance
• Long Term Disability Insurance
• Short-Term Disability Insurance.

We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, disability or veteran status.

#INDTUS

Trescal is a growing company, looking for new talent to join our organization! We are the premier independent calibration, repair, and asset services provider in the U.S. We provide our customers single-source, cost-effective, best-in-class solutions.

Our team is comprised of talented professionals who excel at providing industry leading calibration, repair and asset management services to our customers. As an employee at Trescal, you will join a people-centric company with an incredible culture. We encourage new ideas and suggestions in order to continue to offer both customers and employees the services and benefits in a dynamic, global marketplace. We value teamwork, integrity, quality, innovation, and dynamic engagement. Does Trescal sound like the place for you? Then join our team!

We have a great opportunity for a Calibration Technician - Level 2 (Resident Professional) to join our team in the Kent, WA area. In this role you will be part of a team that maintains the calibration program on-site at a key customer’s facility:

Responsibilities

• Perform equipment recall for equipment past due and coming due
• Retrieve customer equipment, perform calibrations, and then return equipment to proper location
• Communicate current status of all activities to customer
• Maintain all calibration program related documentation and up-to-date records for all calibration activities
• Occasional support required on weekends and holidays.

Requirements

• Military training or experience (PMEL or TMDE or GPETE or Electronics) OR an Associate Degree in Electronics (or related technical field); OR equivalent work experience & training.
• Minimum of 3 years of experience calibrating test & measurement equipment (in a commercial or military calibration lab)
• Experience in calibrating several different disciplines of test & measurement equipment such as: General Purpose, Mechanical, Dimensional, Thermal, Electronics / DCLF, Force / Load Cells, and Accelerometers
• Working knowledge of ISO/IEC 17025 and ANSI/NCSL Z540-1 requirements
• Able to work independently
• Very good organizational skills, meticulous with details
• Strong communication skills including written, verbal and listening skills.
• Proficient computer skills including but not limited to Microsoft Office (Word & Excel), Internet research, data entry, etc.
• Must be able to lift up to 50 pounds
• Experience interacting with customers in a courteous and professional manner and providing an excellent customer experience.
• Position requires climbing stairs & ladders, crawling behind equipment and working in confined spaces, to perform calibrations

We believe people are the most important part of every business, which is why we offer more than just great health insurance plans at a great rate. At Trescal, we have a strong track record of retaining our employees by providing challenging work experiences, learning and development opportunities, and a success oriented collaborative environment.

In addition, we offer paid time off, a 401k plan, career development opportunities, referral bonuses, and a competitive benefit package, including these company paid benefits:

• Dental

• Vision

• Employee Assistance Program

• Basic Life/AD&D Insurance

• Long Term Disability Insurance

• Short-Term Disability Insurance

We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, disability or veteran status

#INDTUS

THOR Solutions is actively seeking a highly motivated subject matter expert-level Naval Architect with a focus on Structures to support the United States Coast Guard (USCG)'s Ship Design Team in Washington, DC. An ideal candidate will have significant prior experience with designing structural and strength components for shipboard use, experience with marine structural codes, and development and use of structural analysis calculations in U.S. Federal or commercial shipbuilding environments.

Typical Responsibilities:

• Provide technical support and documentation for ship feasibility, concept, preliminary and contract design, integration, stability analysis, hydrodynamic and seakeeping properties.
• Evaluate systems and equipment, develop and analyze requirements, perform studies and documentation relating to hull form, stability, weights, structures, and design.
• Develop system documentation and ship specifications for surface assets and boats, perform structural analysis and design using ISO and class society standards.
• Conduct, witness, and document tests including stability tests, speed, power, maneuvering, and seakeeping trials.
• Provide leadership and coordinates review efforts for verification and validation work for Structural related work efforts in the Naval Architect discipline.
• Review design review comments submitted by junior engineers and advise decisionmakers on considerations for high impact and critical design review decisions.
• Provide mentorship to junior naval architects related to the area of shipboard Structurers design calculations and analyses.

Location: Primarily onsite (at least 3 days/week) at USCG Headquarters in Washington, DC. Alternate telework schedules or work locations may be considered for especially qualified candidates.

Travel:Up to 10% travel is anticipated for ship checks.

Typical Physical Activity: Primarily desk/computer work in an office environment. May involve: repetitive motion. Periodic visits to waterfront/shipboard environments. May involve: traversing shipboard environments (e.g., confined spaces, ladders, hatches) or vision.

Typical Pay Range: The anticipated pay range for this position in the identified location(s) is $120,000 - 150,000. Actual compensation offered will be based upon individual factors including education, qualifications, and experience.

US Citizenship Required:Due to the requirements of the federal contract that this position supports, U.S. citizenship is required. Citizenship will be confirmed via I-9/E-Verify at the start of employment.

Security Clearance Eligibility Required:This position requires a DoD Secret security clearance. A qualified candidate must either already possess an active or interim Secret security clearance (preferred); OR be eligible for a Secret security clearance upon hire.

Required Knowledge, Skills, and Abilities:

• Bachelor’s degree in Naval Architecture or another relevant technical, engineering, or a marine discipline from an ABET-accredited institution.
• At least fifteen (15) years of progressive experience in Naval Architecture. Overall experience should include:
  • At least ten (10) years of documented experience with designing structural and strength components for shipboard use, experience with marine structural codes, and development and use of structural analysis calculations.
  • Experience providing leadership and coordinating review efforts for verification and validation work for Structural related work efforts in the Naval Architect discipline.
  • Reviewing design review comments submitted by junior engineers and advising decisionmakers on considerations for high impact and critical design review decisions.
  • Providing mentorship to junior naval architects related to the area of shipboard Structurers design calculations and analyses.
• At least one (1) year of experience related to U.S. Federal or commercial ship or boat building acquisition programs required.
• Experience with naval architecture software solving complex problems regarding hull design.
• Experience with corrosion principles of metals for surface assets and boats.
• Knowledge of USN, USCG, IACS and/or commercial ship design rules and regulations.
• Proficient with common productivity software.
• Strong communications skills.

Additional Preferred Knowledge, Skills, and Abilities:

• Master’s degree in Naval Architecture or another relevant technical, engineering, or a marine discipline from an ABET-accredited institution.
• Experience with DoD ACAT I or DHS Level I shipbuilding programs.
• Relevant certifications, such as:
  • Professional Engineer (PE) license.
  • Project Management Professional (PMP) certification.
  • DHS Systems Engineering certification.
  • DHS Program Management certification.

Benefit Offerings: Along with competitive pay, THOR offers a comprehensive benefits package including:

• Paid Time Off (accrued)
• Paid Holidays
• 401(k) with employer match and traditional/Roth options
• Medical Insurance (3 plan options) + TRICARE Supplemental Coverage
• Dental Insurance (2 plan options)
• Vision Insurance Plan
• Healthcare and Dependent Care Flexible Spending Accounts
• Commuter/Transit Benefits
• Basic Life/AD&D, Short-Term and Long-Term Disability Insurance
• Supplemental Life Insurance
• Pet Benefits
• Legal Resources
• ID Theft Benefits
• Employee Assistant Plan and Work-Life Program
• Voluntary Leave Transfer Program
• Tuition Reimbursement Program
• Employee Referral Program

Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens.

Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran’s Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation’s most complex military, public sector and industry challenges.

THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment.

If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at [email protected] or (571) 215-0077.

THOR Solutions is actively seeking a highly motivated senior-level Naval Architect to support the United States Coast Guard (USCG)'s Ship Design Team in Washington, DC. An ideal candidate will have significant prior experience with U.S. Federal or commercial shipbuilding programs, standards, and regulations.

Typical Responsibilities:

• Provide technical support and documentation for ship feasibility, concept, preliminary and contract design, integration, stability analysis, hydrodynamic and seakeeping properties.
• Evaluate systems and equipment, develop and analyze requirements, perform studies and documentation relating to hull form, stability, weights, structures, and design.
• Develop system documentation and ship specifications for surface assets and boats, perform structural analysis and design using ISO and class society standards.
• Conduct, witness, and document tests including stability tests, speed, power, maneuvering, and seakeeping trials.

Location: Full time onsite at USCG Headquarters in Washington, DC. May be limited hybrid flexibility with customer approval.

Travel:Up to 10% travel is anticipated for ship checks.

Typical Physical Activity: Primarily desk/computer work in an office environment. May involve: repetitive motion. Periodic visits to waterfront/shipboard environments. May involve: traversing shipboard environments (e.g., confined spaces, ladders, hatches) or vision.

Typical Pay Range: The anticipated pay range for this position in the identified location(s) is $120,000 - 150,000. Actual compensation offered will be based upon individual factors including education, qualifications, and experience.

Eligibility for a SECRET Security Clearance is Required: This position requires eligibility for a Secret security clearance, to be obtained after hire. Only U.S. citizens are eligible for a security clearance; therefore, only current U.S. citizens will be considered for this position.

Required Knowledge, Skills, and Abilities:

• Bachelor’s degree in Naval Architecture or another relevant technical, engineering, or a marine discipline from an ABET-accredited institution.
• At least six (6) years of progressive experience in Naval Architecture.
• At least one (1) year of experience related to U.S. Federal or commercial ship or boat building acquisition programs required.
• Experience with naval architecture software solving complex problems regarding hull design.
• Experience with corrosion principles of metals for surface assets and boats.
• Knowledge of USN, USCG, IACS and/or commercial ship design rules and regulations.
• Proficient with common productivity software.
• Strong communications skills.

Additional Preferred Knowledge, Skills, and Abilities:

• Master’s degree in Naval Architecture or another relevant technical, engineering, or a marine discipline from an ABET-accredited institution.
• Experience with DoD ACAT I or DHS Level I shipbuilding programs preferred.
• Relevant certifications preferred, such as:
  • Professional Engineer (PE) license.
  • Project Management Professional (PMP) certification.
  • DHS Systems Engineering certification.
  • DHS Program Management certification.

Benefit Offerings: Along with competitive pay, THOR offers a comprehensive benefits package including:

• Paid Time Off (accrued)
• Paid Holidays
• 401(k) with employer match and traditional/Roth options
• Medical Insurance (3 plan options) + TRICARE Supplemental Coverage
• Dental Insurance (2 plan options)
• Vision Insurance Plan
• Healthcare and Dependent Care Flexible Spending Accounts
• Commuter/Transit Benefits
• Basic Life/AD&D, Short-Term and Long-Term Disability Insurance
• Supplemental Life Insurance
• Pet Benefits
• Legal Resources
• ID Theft Benefits
• Employee Assistant Plan and Work-Life Program
• Voluntary Leave Transfer Program
• Tuition Reimbursement Program
• Employee Referral Program

Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens.

Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran’s Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation’s most complex military, public sector and industry challenges.

THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment.

If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at [email protected] or (571) 215-0077.

Location: Falconer, NY

Salary Range: $ 35.48

About SKF:

SKF, reducing friction since 1907, re-imagining rotation for a better tomorrow!

SKF is an industry-leading manufacturer that has been a cornerstone in industrial life. Wherever there are machines or products in motion, SKF bearings are there to reduce friction. SKF drives the industries that support our way of life, powers the machines that put food on the table, and even helps explore the cosmos.

Sustainability is at the heart of everything we do. SKF is on pace to decarbonize all its production facilities by 2030.

We’re guided by our SKF values. Collaboration is critical to the success of our colleagues, partners, and customers. Curiosity and Courage provide a foundation for innovation and advancement. And we do this work out of Care for our people, customers, communities, and the planet.

We’re a company committed to a culture of belonging, where all our people are encouraged to be themselves and grow their careers in an equitable environment.

Learn about SKF at www.skf.com .

Summary:

Install, calibrate, align, troubleshoot, test and repair Metrology equipment in compliance with prescribed and/or acceptable methods. Calibrate and monitor equipment per in-house procedures and specifications. Calibrate and record variations of test equipment and repair events per SKF procedures.

Key responsibilities:

• Receives oral and/or written assignments pertaining to operation to be performed specifying location and general nature of work and general special instructions when necessary.
• Secures any information including schematics, procedures, equipment manuals, and other related technical documentation as necessary.
• Updates schematics and technical data when circuitry or system has been changed, modified, or otherwise necessary.
• Observes equipment operation, and perso nnel applications of measurement and test equipment for compliance to metrology, inspection, and customer based standards as necessary.
• Inspects circuits and overall gaging system using various types of test equipment to determine the cause of any malfunction.
• Removes, tests, repairs or replaces at the PC board, electronic component, or mechanical level including but not limited to: analog, digital, transistors, leds, integrated circuits, motors, power supplies, relays, solenoids, limit switches, logic controllers, sensors, styli, drives, as necessary.
• Must have mechanical, electronic, and operational knowledge of metrology equipment.
• Must be able to interpret electronic schematics, blueprints, illustrated part breakdowns, and technical data to metrology equipment.
• Must keep current on electronics, optics, metrology, and troubleshooting techniques.
• Assists other skilled trades, engineering, supervision, when necessary.
• Ability to program, configure, maintain, and repair microprocessor based metrology equipment.
• Must be able to operate, and train others in the proper operation of all in process and post process gaging.
• Ability to perform surface lapping and optical flat measurements needed to repair and calibrate gaging.
• Knowledge of various computer operating systems, program, and software applications.
• Perform optical alignments to equipment.
• Installs or modifies electronic controllers and instruments per factory or SKF specifications.
• Assists manufacturers’ service representatives and service engineers during the installation and repair of metrology equipment.
• Maintain selected inventory of metrology equipment spare parts.
• Updates the records of work performed in the resolution of these issues as necessary. Other duties as assigned.

Requirements:

Education Requirements : Must posses a high school diploma or GED.

Work Experience Requirements: Must possess a certified journeyman card or have 8 years of documented work within the trade, in an industrial environment. Documented military experience will be considered.

Machines and Equipment: Calibration and repair of all surface finish and form profile and roundness systems (Form Talysurf, Federal Formscans, Federal Surfanylyzers, etc…), waveometers, anderonmeters, temperature / environmental recorders, optical comparators, pc based hardware associated with gaging, in-process and post process gaging systems. Calibrations of NDT, Magnaflux, Nital etch, Zyglo, and Eddy current systems. Calibration and repair of electro-mechanical, electro-optic, drives and controllers associated with laser marking systems.

Tools used: Electronic test equipment including but not limited to computers, oscilloscopes, multimeters, frequency counters and generators, multifunction calibrators, multipoint recorders, master and portable potentiometers, timers, gage blocks, other traceable standards. Various hand tools and equipment including but not limited to soldering irons, air pencils, taps and dies, mini lathe, drill press, surface lapping tools, calibration jigs and fixtures.

Materials Processed: N/A

Physical Demands: Standing and walking primarily. Transports test equipment to and from the job site.

Working Conditions: Works above and below floor level, climbs stairs and ladders as required. Assumes varied and awkward positions, in and out of doors as required.

Potential Hazards: Risk of exposure to laser radiation, shocks, burns, cuts, bruises, and certain chemical compounds. Wears personal protective equipment as necessary, safety goggles, facemask, rubber shoes or boots, grounding strap, apron and gloves.

Safety of Others: Instructs personnel as to standard safety procedures to be used, as well as the possibility of accidents and inherent dangers associated with working on equipment. See that warnings are posted on equipment when necessary, and that Personal Protective Equipment is used.

May be required to support other initiatives as follows:

• Dedicated, full time hourly resource, responsible for a specific area.
• Focuses on defined and quantified levels of achievement,
• Driver of lean manufacturing (pillars) and a leader of cultural change.
• Trainer and facilitator for continuous improvement activities that take place within their area.
• Perform audits on achievements to verify and insure sustainability.
• Develop and implement recognition for an area’s achievements.

What You’ll Love About SKF:

Rest and Relaxation. Vacation is accrued beginning the July 1 immediately following your Hire Date and eligible for 13 paid holidays!

Health and Wellness Benefits. SKF cares about the wellbeing of our employees. Excellent medical and dental plans to fit your needs; a wellness plan that includes biometric screening and health risk assessment for you and your spouse!

Invest in your Future. SKF offers amazing retirement options! Participate in our 401K program that boasts a per pay period 6% deposit to your Vanguard account (100% Vested).

Much more! Growth opportunities, employee assistance program, life insurance, vehicle discount programs, and with so many benefits to working for SKF, we could not name them all!

Invest in your Future. Participate in our 401K program that boasts a 10% employer contribution: 100% match up to 5% of your elected contribution (100% Vested) plus an additional 5% company contribution.

Reports to: Electrical Engineer

Location: Falconer, NY

Job ID: 22331

SKF provides equal employment [and affirmative action] opportunities to applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability.

By applying to this job you acknowledge how SKF treats candidate data. Click HERE to review the SKF Data Privacy Consent Statement.

PHB Inc. Machining Division has a current need for a R&D Programmer/Set-Up Machinist. This is a first shift, full-time position with advancement opportunities within the company.

Responsibilities:

• Read and interpret technical blueprints and design models
• Perform complex set-ups including creating CNC Programs, take a part from print to first piece
• Input the product design into the computer modeling software
• Decipher CMM Printouts and apply correct adjustments to keep part in spec
• Build basic fixtures for production
• Choose and load the correct cutting tools for the job
• Adjust machine settings to desired specifications
• Setup work area for efficient material flow
• Confers with engineers, production personnel, programmers, quality control or others to resolve machining problems and optimize programs and tooling
• Complete gage room documentation for first piece approval
• Possess a complete knowledge of machine tool and control functions
• troubleshoot problems in manufacturing
• Train employees to operate CNC equipment and set-up basics
• Complete or update setup instructions and/or work instructions, tooling sheets, etc.

Requirements:

• High school diploma or GED
• Previous work experience as a CNC Programmer in a manufacturing setting
• Experience with Mastercam software
• Experience with Mazak and Okuma
• Ability to read and interpret design blueprints
• Extensive experience with computer modeling software
• Strong attention to detail
• Ability to work independently and stick to a deadline
• Ability to work after-hours when required

PHB, Inc. located in Fairview Pennsylvania, recognized globally as a fully integrated supplier of quality parts and assemblies. PHB, Inc. is a highly automated and technologically advanced manufacturer with capabilities consisting of zinc die casting, aluminum die casting, machining, plastic and rubber molding, tool & die, injection molding, and product assembly. We service many consumer and OEM industries.

About PCB Piezotronics, Inc.

PCB manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load and shock for test, measurement, monitoring and control requirements. Our sensors support testing in aerospace and defense, automotive, transportation, civil engineering, and general R&D industries. PCB is a wholly-owned subsidiary of Amphenol Corporation. With a focus on Total Customer Satisfaction for both our internal and external customers, we have a strong and ongoing commitment to being a great place to work! Learn more about our team | www.PCB.com | https://www.linkedin.com/company/pcb-piezotronics/

More Reasons to Join the Team

PCB offers a highly collaborative and team-based atmosphere. Total Customer Satisfaction, for internal and external customers alike, is at the heart of our business and guides our interactions every day. Social events and opportunities are hosted throughout the year aimed to develop internal relationships and promote a culture focused on collaboration and teamwork. PCB also provides all full-time team members with 100% employer paid medical premiums for you and your family, a competitive PTO package and 10 company paid holidays

Primary Objective:

Follows all PCB procedures and forms in compliance to ISO 9001. As a Calibration Technician-2nd shift with PCB Piezotronics, Inc., you will perform a variety of basic tests on manufactured products by following written procedures, under close supervision. Utilizes basic electrical and mechanical test equipment such as meters, pressure pumps, dead weight testers, shakers and test chambers. Observes all safety precautions per department guidelines when operating test equipment, especially when handling liquid nitrogen, operating testing ovens and when performing ballistics tests

Additional Duties:

• Responsible for performing routine electrical, mechanical and environmental tests and calibrations on less complex PCB products.
• Responsible for understanding and using proper ESD procedures as outlined in the ESD manual.
• Performs all necessary tests efficiently and accurately by following established written procedures; follows steps on the product job router, writes legibly, signs and dates traveler when steps are completed.
• Responsible for making sure that all products meet established test and/or calibration specifications and for notifying Leadership when they do not.
• Ensures that test equipment calibration stickers are not expired before using and notifies Leadership if expired or close to expiration; communicates with Leadership concerning any problems with product testing equipment.
• Follows safety rules and keeps area and equipment in a clean and orderly condition.
• Performs other related duties as directed to ensure efficient operation of department and PCB

Minimum Qualifications:

• Education: High school graduate or equivalent
• Experience: Knowledge in pre-calibration testing such as transverse, time constant, observes all safety precautions per department guidelines when operating test equipment, especially when handling liquid nitrogen, operating testing ovens and when performing ballistics tests.
• Basic computer skills required in operating calibration software

Preferred Qualifications:

• Resonant frequency, bias voltage, capacitance and insulation testing and acceleration sensitivity.

Additional Benefits:

• 100% Company Paid Medical Insurance Premiums
• Dental and Vision Insurance
• Company funded HSA or HRA Accounts
• Employer paid basic life insurance, short- and long-term disability insurance
• 401k Company Match
• Annual Bonus
• Tuition Reimbursement Program and Dependent Scholarship Plan
• Employee Discounts, Holiday Gift Certificates, Referral Bonus

Physical Demands (U.S. only)

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand; walk; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

International Traffic in Arms Regulations

This position requires access to “controlled technology” as defined in the Export Administration Regulations (15 C.F.R. §730 et. seq.) and “technical data” as defined in the International Traffic in Arms Regulations (22 C.F.R, Chapter 1, Subchapter M). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work.

Equal Employment Statement

PCB Piezotronics is an equal opportunity employer and as such takes affirmative steps to safeguard employees and applicants from discrimination on the basis of protected class status, including race, creed, color, religion, sex, sexual orientation, gender identity, national origin, age, military or veteran status, disability, predisposing genetic characteristics, marital or family status, domestic violence victim status, arrest record or criminal conviction history, political affiliation, or any other impermissible basis.

PCB Piezotronics, Inc. is an Equal Opportunity Employer

Job Description:

• SEA 21, NAVSEA’s Director of Surface Ship Maintenance, Modernization, and Sustainment is seeking professional support services (PSS) to support the Government’s existing organization, personnel, knowledge, and processes.
• SEA 21 integrates sustainment and maintenance strategies, modernization plans, training needs, and technical, logistics, and programmatic efforts to best manage the lifecycle of U.S. and partner Navy surface ships and systems from fleet introduction through transfer or disposal.
• SEA 21 is the dedicated life cycle management organization for the Navy’s in-service surface ships and is responsible for managing critical modernization, maintenance, training, and inactivation programs.
• SEA 21 provides wholeness to the fleet by serving as the primary technical interface, ensuring surface ships are modernized with the latest technologies and remain mission relevant throughout each ship’s service life. The organization also maintains inactive ships for future disposal, donation, or transfer, to include follow-on technical support to our partner navies.

Duties include:

• A naval architect designs, builds and maintains boats and ships.
• These vessels can range widely in size from small combatant craft to large aircraft carriers. Naval architects are also responsible for designing submarines that range in size from small unmanned undersea vehicles to large ballistic missile carrying submarines.
• The follow are the primary phases of a ship design that naval architects are required to be proficient in: hydrostatics, hydrodynamics, flotation and stability, structures, arrangements, and construction.
• For U.S. Navy ship designs naval architects are required to be proficient with conducting cost and survivability assessments.
• Naval architects need to be proficient with modern computation tools to perform ship and submarine design studies.
• Due to the complexity of modern naval ships and craft, naval architects are required to integrate the activities of a variety of technology specialists.
• Naval architects are required to synthesize the often conflicting demands from competing design constraints to determine the most balanced designs for a ship or submarine.

Required Skills and Experiences:

Required:

• Minimum of 5 years professional experience related to labor category

Preferred:

• 7 years professional experience related to labor category.
• Experience supporting a DoD component

Degree Requirements:

Required:

• Bachelor’s degree in marine engineering, naval architecture, or related field

Preferred:

• Master’s degree in marine engineering, naval architecture, or related field

• Professional engineer’s license.

• Must be a U.S. citizen

• A secret security clearance.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

ORBIS offers an excellent benefits package and a competitive salary in a professional atmosphere.

Description & Requirements

Shape the future of defense with MANTECH! Join a team dedicated to safeguarding our nation through advanced tech and innovative solutions. Since 1968, we’ve been a trusted partner to the Department of Defense, delivering cutting-edge projects that make a real impact. Dive into exciting opportunities in Cybersecurity, IT, Data Analytics and more. Propel your career forward and be part of something extraordinary. Your journey starts now-protect and innovate with MANTECH!

***This is for a future opportunity***

MANTECH seeks a motivated, career and customer-oriented Naval Architect. The candidate must be located within a commutable distance to Washington DC to allow for periodic on-site collaboration.

In this role, you will apply your expertise in naval architecture and computational fluid dynamics (CFD) to support the design, analysis, and optimization of hovercraft, ships, and other maritime systems. This position plays a critical part in ensuring performance, efficiency, and safety across a variety of naval platforms.

Responsibilities include but are not limited to:

• Performing a wide variety of naval architecture design and analysis activities related to hovercraft, ships, boats and other marine systems in support of MANTECH’s military and commercial customers.
• Performing computational fluid dynamics (CFD) and finite element analyses (FEA) to assess system performance characteristics assessments, validate system adequacy, and optimize system design.
• Working collaboratively with goal-oriented project teams, including other engineers, program managers, and CAD designers to validate design assumptions, refine system-level performance, and develop project deliverables.
• Manages task requirements and work execution timelines through development of Plans of Action and Milestones (POA&Ms) with minimal guidance from supervisor.
• Documenting technical findings in well-organized and comprehensive reports and presenting results to both technical and non-technical stakeholders.

Minimum Qualifications:

• Bachelor’s degree in Naval Architecture, Ocean Engineering, Mechanical Engineering, or a closely related field
• 3+ years of experience in naval architecture with a focus on CFD applications
• Proficiency in CFD software such as Star-CCM+, ANSYS Fluent, OpenFOAM, or similar tools, and in FEA software such as Femap, NASTRAN, ANSYS or similar.
• Strong understanding of fluid mechanics, hydrodynamics, and maritime systems
• Experience with CAD and 3D modeling tools
• Excellent written and verbal communication skills for technical documentation and presentations
• Ability to utilize spreadsheets to program first-principle and empirical design equations. Ability to generate high-quality design and analysis reports as well as the ability to interpret experimental data and validate simulation results.

Preferred Qualifications:

• Experience with model testing, sea trials, or hydrodynamic test facilities
• Familiarity with U.S. Navy ship design standards and practices
• Experience with programming or scripting (Python, MATLAB) for automation and post-processing
• Experience working with composite materials, including basic understanding of materials and fabrication, and development of fabrication layup details and ply tables
• Active participation in industry conferences or publications related to naval hydrodynamics

Clearance Requirements:

• Must hold an Active Secret Clearance.

Physical Requirements:

• Must be able to remain in a stationary position 50%
• Needs to occasionally move about inside the office to access file cabinets, office machinery, etc.
• Frequently communicates with co-workers, management, and customers, which may involve delivering presentations. Must be able to exchange accurate information in these situations
• Ability to travel and perform ship inspections, including climbing and descending ladders.

The projected compensation range for this position is $75,700.00-$126,300.00. There are differentiating factors that can impact a final salary/hourly rate, including, but not limited to, Contract Wage Determination, relevant work experience, skills and competencies that align to the specified role, geographic location (For Remote Opportunities), education and certifications as well as Federal Government Contract Labor categories. In addition, MANTECH invests in its employees beyond just compensation. MANTECH’s benefits offerings include, dependent upon position, Health Insurance, Life Insurance, Paid Time Off, Holiday Pay, short-term and long-term Disability, Retirement and Savings, Learning and Development opportunities, wellness programs as well as other optional benefit elections.

MANTECH International Corporation considers all qualified applicants for employment without regard to disability or veteran status or any other status protected under any federal, state, or local law or regulation.

If you need a reasonable accommodation to apply for a position with MANTECH, please email us at [email protected] and provide your name and contact information.

Cydecor is a premier Federal Government solutions provider, delivering differentiated innovations in mission systems and business platforms.We leverage leading-edge secure systems and software development, backed by industry-leading subject matter expertise, and business intelligence to enable decision-support and remain ahead of ever-evolving national security challenges.Our success rests squarely on three bedrock principles: People, our center of gravity; Mission, what inspires us; and an unyielding commitment to Excellence, what separates us.

Job Description:

Cydecor is seeking a Senior Naval Architect to provide support to a Naval Sea Systems Command (NAVSEA) customer.

This role will support the analysis, evaluation, and oversight of technical and design requirements and performance for new and ongoing shipbuilding programs. Candidates should possess strong naval architecture and engineering fundamentals, as well as expertise with surface and undersea shipbuilding programs.

Responsibilities include:

• Provide ship structure and design analyses
• Study and establishment of ship design products and specifications.
• Provide evaluation of ship performance.

Here’s what you need:

• Bachelor’s degree in engineering or a related field.
• 15+ years of relevant experience.
• Relevant experience and expertise in Naval Architecture.
• Experience and expertise in the DOD 5000 process and guidelines.
• Interim or Active Secret clearance.

Bonus points if you have:

• Master’s degree in Naval Architecture or Marine Engineering.
• Professional Engineer (PE) License.

Security Clearance:

Minimum: Interim or Active Secret security clearance; Preferred: Interim or Active Top Secret security clearance.

Education:

Bachelor’s level degree in engineering or a related field.

Work Schedule:

M-F, Onsite

Compensation and Benefits:

The projected compensation range for this position is $115, 0000.00 - $180,000.00. There are numerous factors that can impact a final salary/hourly rate including, but not limited to, relevant work experience, skills and competencies that align to the role, work location, education/certifications, and a contract’s Labor Categories.

Cydecor offers a comprehensive compensation package including Health and Dental Insurance, Vision and Life Insurance, Short-Term & Long-Term Disability, 401(K) + company match, Paid Time Off (PTO), Paid Company Holidays, Tuition Assistance Program and more.

What We Believe

We have an unwavering commitment to diversity with the aim that every one of our people has a full sense of belonging within our organization. As a business imperative, every person at Cydecor has the responsibility to create and sustain an inclusive environment.

Equal Employment Opportunity Statement

Cydecor is an Equal Employment Opportunity/Affirmative Action Employer (EEO/AA). All employment and hiring decisions are based on qualifications, merit, and business needs without regard to race, religion, color, sexual orientation, nationality, gender, ethnic origin, disability, age, sex, gender identity & expression, veteran status, marital status, or any other characteristic protected by applicable law.

If you are a qualified individual with a disability and/or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site because of your disability. You can request assistance by contacting [email protected] or calling 703-884-2105.

Cydecor is a premier Federal Government solutions provider, delivering differentiated innovations in mission systems and business platforms. We leverage leading-edge secure systems and software development, backed by industry-leading subject matter expertise, and business intelligence to enable decision-support and remain ahead of ever-evolving national security challenges. Our success rests squarely on three bedrock principles: People, our center of gravity; Mission, what inspires us; and an unyielding commitment to Excellence, what separates us.

Job Description:

Cydecor is seeking a Naval Architect to provide support to a Naval Sea Systems Command (NAVSEA) customer. There are several openings spanning junior to senior positions.

This Naval Architect will design, build, and maintain Unmanned Systems (UxSs) in PMS 406’s portfolio. This role will use knowledge of hydrostatics, hydrodynamics, flotation and stability, structures, arrangements, and construction, and cost and survivability assessment to synthesize the often conflicting demands from competing design constraints to determine the most balanced designs for UxSs. This role requires proficiency with modern computation tools to perform UUV and USV design studies.

We are seeking a skilled Naval Architect to bring strong ship architecture and design competency for Navy clients. At the intersection of mission and technology, this role will help Navy acquisition organizations acquire or develop mission-suitable Navy vessels and systems. This role involves applying your naval architecture experience to performing and supporting related research and development (R&D), integration, and test and evaluation (T&E) activities in support of acquisition programs for Navy shipbuilding. You will help to architect, design, and evaluate the operation of naval vessels and develop ship concept designs, conduct concept design studies and analyses, and perform operational or performance evaluations. You’ll design software to prepare plans, drawings, and analytical models. You’ll evaluate designs for feasibility and analyze critical elements or performance of the design using analytic tools, model scale- and full-scale testing, or prototypes, as appropriate. You’ll prepare reports and make recommendations for design changes. You’ll identify and apply regulatory, industry, and Navy standards.

You bring a zest for understanding how marine vessels are designed, how the naval architecture discipline contributes to the overall realization of a ship, and how to find and proactively mitigate risks in ship designs. You have advanced skills and competencies in vessel design conceptualization, arrangements, hydrostatics, hydrodynamics, requirements development, and performance characterization. You have strong communication skills and can effectively communicate solutions verbally and through visual media. You’ll work cross-functionally with a technical and acquisition team consisting of engineers of other disciplines and will lead naval architecture activities in support of program efforts

Job Responsibilities:

• Performs a wide variety of design and analysis activities related to hovercraft, ships, boats and other marine systems in support of ManTech’s military and commercial customers.
• Performs as task lead on design and analysis activities related to centrifugal fans and ducted air propellers.
• Works collaboratively with goal-oriented project teams, including other engineers, program managers, and CAD designers.
• Manages task requirements and work execution timelines through development of Plans of Actions with Milestones (POAMs) with minimal guidance from supervisor.
• Continually reviews technical data to identify and diagnose problems such as system interface issues, part interferences, hardware incompatibility, and provides recommended solutions to team.
• Plans and conducts research, development, or installation of products and systems in conformance with customer requirements, best practices, and regulatory guidelines.
• Produces high-quality deliverable reports documenting procedures and results of design and analysis activities.

Here’s what you need:

• Senior Level: 10+ year of professional experience in Naval Architecture and a bachelor’s degree in engineering or related field.
• Mid-Level: 4+ year of relevant experience and a bachelor’s degree in engineering or related field.
• Junior: 1+ year of relevant experience.
• Experience with Autodesk Inventor and/or SolidWorks.
• Ability to travel and perform ship inspections as needed and system prototype installations.
• Ability to utilize spreadsheets to program first-principle and empirical design equations.
• Ability to generate high-quality design and analysis reports.

Bonus points if you have:

• Senior Level: 15+ year of professional experience in Naval Architecture and a master’s degree in naval architecture or marine engineering.
• Mid-Level: 7+ year of relevant experience.
• Junior: 4+ year of relevant experience and a bachelor’s degree in engineering or related field.
• Professional Engineer License.
• Knowledge of DoD or DoN procedures and policies, including the DoD 5000 process.
• Knowledge of Navy design standards and practices for Navy ships and systems.
• Possession of excellent written and verbal technical communication skills.
• Experience with experience related to fan design.
• 2 or more years of Computational Fluid Dynamics experience.
• Experience working with composite materials, including basic understanding of materials and fabrication, and development of fabrication layup details and ply tables.
• Ability to generate complete and functional 3D model assemblies.
• Ability to generate complete, high-quality 2D drawing packages.

Security Clearance: DOD SECRET

Education: Bachelor’s degree in Engineering or related field. Master’s preferred.

Work Schedule: M-F, Onsite

Compensation and Benefits:

The anticipated compensation range for this position is $100,000 - $185,000. There are numerous factors that can impact a final salary/hourly rate including, but not limited to, relevant work experience, skills and competencies that align to the role, work location, education/certifications, and a contract’s Labor Categories.

Cydecor offers a comprehensive compensation package including Health and Dental Insurance, Vision and Life Insurance, Short-Term & Long-Term Disability, 401(K) + company match, Paid Time Off (PTO), Paid Company Holidays, Tuition Assistance Program and more.

What We Believe

We have an unwavering commitment to diversity with the aim that every one of our people has a full sense of belonging within our organization. As a business imperative, every person at Cydecor has the responsibility to create and sustain an inclusive environment.

Equal Employment Opportunity Statement

Cydecor is an Equal Employment Opportunity/Affirmative Action Employer (EEO/AA). All employment and hiring decisions are based on qualifications, merit, and business needs without regard to race, religion, color, sexual orientation, nationality, gender, ethnic origin, disability, age, sex, gender identity & expression, veteran status, marital status, or any other characteristic protected by applicable law.

If you are a qualified individual with a disability and/or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site because of your disability. You can request assistance by contacting [email protected] or calling 703-884-2105.

Job Summary:

Responsible for performing quality calibrations adhering to corporate quality standards and procedures.

Essential Functions:

• Calibration encompassing the following core disciplines: Temperature, Pressure, Flow, Vibration, Mass, Electrical, Electronics, Time, Frequency, Radio Frequency, Torque, Force and Dimension. Additional training will be provided post-hire as needed.
• Prepare for all on-sites as assigned by Lead Tech or Service Manager; this includes reviewing equipment lists, procedures, specifications, and ensuring proper standards are selected for work assigned.
• Person must ensure he/she has calibration stickers, PMD work orders, worksheets, tags, cleaning supplies, directions, customer contact information and survey cards; downloading customer information to an on-site laptop may be required.
• Person must ensure all company issued tools and property are in proper working order and in calibration.
• Perform clerical work associated with calibration activities including certificates of calibration. Must provide the original data worksheet for final inspection by Quality.
• Perform quality inspection of calibrated equipment as approved by the Quality Manager.
• All certificates for equipment calibrated on-site and in house shall be completed in a timely manner (within 48 hours of job completion.)
• Keep in good order all tools and equipment, practice good housekeeping
• Maintain a safety and customer service mindset at all times
• Consistently maintain good work attendance and productive work ethic.
• Will perform other duties as assigned by the Service Manager

Minimum Requirements/Qualifications:

• A strong understanding of a wide variety of precision measurement equipment, to include the care and use of Instrumentation, Gages, and Precision Measurement Equipment; calibration program management, and Measurement Principles.
• Be proficient in gage management software
• Be computer proficient in all Microsoft Office applications
• Have a strong understanding of computer system peripherals and communication configurations
• Demonstrate excellent interpersonal and customer service skills
• Have excellent written and oral communication skills, both internally and externally
• Demonstrate self motivation, initiative, honesty, integrity, and attention to detail
• Have a valid driver’s license and clean driving record
• Associates Degree in a technical discipline preferred; Instrumentation, Industrial, Mechanical, or Electronics Engineering, for example. Navy or Marine Corp GCAMS / ACTS , AF PMEL, or Army MOS - 94H Test Measurement & Diagnostic Equipment Support Specialist

Core Competencies

• Commitment to Excellence - Check your work
• Customer Relationship Management - communicate with customers to deliver better service
• Methodical Approach - troubleshooting
• Team Building

Physical Demands:

Stands greater than four hours at a time

May require walking 2 - 4 miles during an 8 hour period

Stoops and bends below knee level 2 - 4 times an hour

Lifts and carries less than 50 pounds but greater than 25 pounds repetitively

Climbs stairs more than four times in an eight hour shift

Pushes / pulls objects greater than 25 pounds

Reaches out

Reaches overhead

Repetitively uses feet

Repetitively uses hands (computer keyboard)

Grips with hands

Job Category: Engineering

Time Type: Full time

Minimum Clearance Required to Start: Secret

Employee Type: Regular

Percentage of Travel Required: Up to 10%

Type of Travel: Continental US

* * *

The Opportunity:

Seeking an experienced Naval Architect to provide technical and management support for a U.S. Navy acquisition program in our Washington DC office.

Responsibilities:

• Develop and analyze new ships and ship system concepts.
• Manage the overall schedule, risk, and resource management for integrated product teams.
• Prepare budgets and schedules to support overall acquisition schedule for U.S. Navy ships.
• Provide technical and planning support to U.S. Navy program office to meet program milestones and mitigate risk.
• Work with program Technical Director to plan and direct work required to resolve technical issues.

Qualifications Required:

• Bachelor’s Degree in Naval Architecture or Ocean Engineering
• Ten or more years experience in U.S. Navy ship design and engineering.
• Five or more years experience supporting a U.S. Navy program office.
• Strong organization and time management skills.
• Good interpersonal skills to work with project teams and stakeholders.
• Must be a US citizen and have ability to obtain and maintain a security clearance.
• Skills in Microsoft Office
• Good written and verbal (English) communication skills.

Desired:

• Experience with U.S. Navy surface combatants.

This position is contingent on funding and may not be filled immediately. However, this position is representative of positions within CACI that are consistently available. Individuals who apply may also be considered for other positions at CACI.

What You Can Expect:

A culture of integrity.

At CACI, we place character and innovation at the center of everything we do. As a valued team member, you’ll be part of a high-performing group dedicated to our customer’s missions and driven by a higher purpose - to ensure the safety of our nation.

An environment of trust.

CACI values the unique contributions that every employee brings to our company and our customers - every day. You’ll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality.

A focus on continuous growth.

Together, we will advance our nation’s most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy.

Your potential is limitless. So is ours.

Learn more about CACI here.

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here.

The proposed salary range for this position is:
$103,800 - $218,100

CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Amentum is seeking technical System Engineer professionals with related education and/or experience to support Naval projects at Dahlgren, VA. You will be part of our growing systems & software engineering team and contribute to our diverse skillsets across multiple prime contracts in support of our Centers of Excellence. We are looking for individuals to join our team atmosphere that are eager to make a difference by solving complex Digital Engineering challenges. Apply your skills to the latest DoD weapons and sensor systems, modernizing the Navy and contributing to mission success. Successful candidates must possess excellent communication skills and interact directly with customers and engineering personnel.

The work location for this position is on-site in Dahlgren, Virginia where we have provided support to the customer for over 50 years!

**Position contingent on contract award which is expected in 2026*\

All Levels Requirements:

• Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.
• Candidates must maintain a valid Real ID driver’s license required for access to customer site and have access to reliable transportation (rideshare options such as Uber, Lyft etc. are not permitted) as this position requires occasional travel between local worksites during the week.

Senior Level Minimum Requirements and Skills

• Ten (10) years of experience in DoD systems architectures, research, design, development, and test and evaluation, or a Bachelor’s degree from an accredited college or university in Engineering, Mathematics, Physics, Operations Research, or Computer Science and six (6) years of experience in DoD systems architectures, research, design, development, and test and evaluation.
• In addition, Five (5) years of experience working with either system engineering, requirements management and architecture tools (such as CORE, Rhapsody, MagicDraw, DOORS, Requisite Pro, OPNET, NETWARS, Caliber RM, and executable UM) or specialized experience in the areas of maritime, launcher, missile, weapon, or weapon control systems concept definition, design, integration, and engineering.

Mid Level Minimum Requirements and Skills

• Five (5) years of experience in DoD systems architectures, research, design, development, and test and evaluation, or a Bachelor’s degree from an accredited college or university in Engineering, Mathematics, Physics, operations research, or Computer Science and two (2) years of experience in Department of Defense (DoD) systems architectures, research, design, development, and test and evaluation.

Desired experience:

• Experience with requirement management, system design, and implementation of systems that possess qualities such as portability, scalability, and interoperability.
• Experience in working with system engineering, requirements management and architecture tools (such as CORE, Rhapsody, MagicDraw, DOORS, Requisite Pro, OPNET, NETWARS, CaliberRM, and executable UM). This includes experience in the development of DoDAF products including OV and OSD.
• Systems requirements management, systems engineering design, utilizing systems engineering software tools and performing systems engineering design, integration engineering, test and evaluation engineering activities.

Entry Level Minimum Requirements and Skills

• Bachelor’s degree from an accredited college or university in Engineering, Mathematics, Physics, operations research, or Computer Science.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

PRIMARY FUNCTION: Trouble shoot, install, inspect, repair and perform preventative maintenance on electronic/electrical equipment and circuits, NC/CNC equipment and hydraulic power units to assure proper function and reliability. Must have formal training or equivalent experience in electronics and be able to identify circuitry malfunctions down to component level. Must be able to read and interpret circuit-wiring diagrams and be proficient in the use of volt OHM meter, signal generator and oscilloscope. May work in close conjunction with production engineers and provide technical assistance in design and modification of automated production equipment. May also trouble shoot, install, inspect, repair and perform preventative maintenance on mechanical components of machinery and equipment.

QUALIFYING PERIOD: Thirty (30) working days. On request of the company or the union and by mutual consent of both, this period may be extended for an additional thirty (30) days or shortened to less than thirty (30) days if a man is obviously unable to perform the work as required.

TOOLS & EQUIPMENT: Complete range of precision measuring instruments and tools necessary to carry out primary function. Employee should furnish the following tools: Electrician’s tool belt and pouch, wire cutters and strippers, verniers, complete set of sockets and ratchets - 1/4", 3/8", and 1/2" drive, complete set of open end and box end wrenches from 1/4" to 1", complete set of screwdrivers, adjustable wrenches, and pliers.

SOURCE OF SUPERVISION: Foreman

WORKING PROCEDURE:

1. Trouble shoot/diagnose electronic/electrical equipment and circuits, NC/CNC equipment and hydraulic power units.
2. Determine necessary repairs to maintain equipment.
3. Repair, rewire, replace circuit boards, encoders, switches, relays, wiring harnesses, electronic components, etc. as necessary to maintain operations.
4. Read, understand and interpret electronic schematics/diagrams and specifications.
5. Dis-assemble/assemble NC/CNC machinery as required to implement electrical/electronic repairs. Must work down to component level.
6. May provide technical assistance in the design and modification of automated production equipment.
7. Perform all other work that may be required to carry out primary function.

Applicants are required to pass the following:

1. Basic Blueprint Reading Test
2. Electrical Test
3. Mechanical Test
4. Analyst Test

Description

Position: Piping Draftsperson/Apprentice

Reports to: BIM Team Lead

Location: Victaulic Global Headquarters, Easton PA

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Prepares drawings, layouts, sketches, and other forms of data presentation as required
• Updates and keeps drawings, directories, and associated files as required
• Maintains electronic system files, records, information, facility directory, drafting standards, etc on a regular and timely basis in accordance with the Company Documentation Retention Policy
• Maintains, follows, and improves upon the document control policies and procedures and drafting standards
• Completes all projects as assigned on a timely basis and within established budgets
• Advise the Project Lead on status of all assigned project milestones
• Assist other VDC departments (as required).

PROFILE (education, experience, languages …)

• Associate Degree in drafting technology, or equivalent work experience, Architectural/Engineering disciplines preferred
• 0-2 years of experience in AutoCAD Drafting required
• 1 year of experience in AutoCAD drafting. 3D Drafting/Rendering, Revit experience desirable
• Excellent communication, leadership, interpersonal and customer skills required
• Must have the ability to travel domestically and internationally
• Experience with Excel, MS Word, Outlook, MS Project, Revit, AutoCAD, CADmep & Navisworks software preferred.
• Able to create drawings and specifications using computer systems and equipment, VDC Drawing Standards Able to work with others in a team setting, or along with and without supervision
• Knowledge of construction materials & methods, and building codes plus

LANGUAGE SKILLS

• English

We’re looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions.

WHAT YOU WILL EXPERIENCE IN THIS POSITION:

Take on a position at nVent Management Company that merges creative thinking with technical detail! As an Electrical Designer, you will contribute to building and refining electrical drawings using advanced CAD software. Your work will guarantee that our plans are accurate and original. You will be responsible for layouts involving power distribution, relay panels, lighting, and control systems. Additionally, you will aid engineers in crafting important diagrams and schematics.

• Prepare and modify electrical drawings with CAD software including AutoCAD Electrical
• Develop layouts for power distribution, relay panels, lighting, and control systems
• Assist engineers in crafting one-line diagrams, three-line diagrams, control schematics, panel schedules, load calculations, and equipment layouts
• Coordinate build details with mechanical, structural, and other project teams
• Review vendor/shop drawings and integrate equipment specifications into the build
• Ensure builds align with company and customer standards
• Maintain accurate documentation and support project deliverables through all phases
• Participate in build meetings and provide technical support during construction
• Manage both small and some parts of large-scale projects independently
• Participate in Lean activities as requested
• Engage in the product development process, including building brainstorming and voice of customer activity
• Initiate/prepare Engineering Change Order (ECO) documentation, including the development of BOM’s
• Perform research and investigation to acquire missing information to ensure all specifications are accurately presented on documentation

YOU HAVE:

• Two-year technical degree in drafting or development preferred
• Ideally 3+ years of electrical, drafting/build experience required
• Advanced knowledge of Product Data Management, ECO, and Product Development Processes
• Advanced skills using AutoCAD Electrical and AutoCAD Vault
• Knowledge of manufacturing processes
• Ability to independently identify and define materials and information needed for a project
• Skills to assemble engineered build packages
• Demonstrated attention to detail and accuracy

WE HAVE:

• A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day

  • nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world’s most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation.
  • Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at www.nvent.com.

• Commitment to strengthen communities where our employees live and work

  • We encourage and support the philanthropic activities of our employees worldwide
  • Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money

• Core values that shape our culture and drive us to deliver the best for our employees and our customers. We’re known for being:

  • Innovative & adaptable
  • Dedicated to absolute integrity
  • Focused on the customer first
  • Respectful and team oriented
  • Optimistic and energizing
  • Accountable for performance

• Benefits to support the lives of our employees

Benefit Overview

At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes:

• Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance.
• A 401(k) retirement plan and an employee stock purchase plan - both include a company match.
• Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection.

At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other’s authenticity because we understand that uniqueness sparks growth.

Shift Hours

This is an in-person position, generally Mon-Fri, 7am-3:15p

Job Description

JWF Industries is seeking a Robotic Welding Programmer to join their team of skilled professionals in Johnstown, PA. This is a critical role responsible for programming robotic welding equipment and ensuring the on-site robots correctly and continuously fabricate metal components that meet manufacturing and customer specifications.

Essential Duties

Essential Duties and Responsibilities will include, but are not limited to:
• Ensuring both weld quality and efficiency through planning and analysis of tasks
• Programming the robots in each of the robotic welding cells using the correct welding practices to meet customer requirements
• Designing, implementing, and maintaining robotic welding fixtures
• Monitoring the production efficiency of the robotic cells, seeking out programming improvement opportunities
• Guiding production employees in the proper methods of operation for each of the robotic cells

Education Level

HS diploma or equivalent

Experience

A minimum of two (2) years of related robotic welding experience and/or related training is required.
Work requires the ability to read, analyze, and interpret blueprints, weld symbols, technical procedures, and/or governmental regulations.
Must have the ability to write reports, document all related processes, and write procedure manuals

Physical Demands

While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. The employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Work Environment

The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Comau, is a worldwide leader in delivering advanced industrial automation products and systems. Its portfolio includes technology and systems for electric, hybrid and traditional vehicle manufacturing, industrial robots, collaborative and wearable robotics, autonomous logistics, dedicated machining centers and interconnected digital services and products able to transmit, elaborate and analyze machine and process data.

At Comau, we globally thrive by building and fostering an equitable and inclusive workforce across all dimensions: gender, sexual diversity, abilities, ethnicity, and generations. We are committed to foster a culture that acknowledges individual uniqueness and fosters creativity, in which employees of diverse backgrounds and with different abilities can feel safe, respected, and included.

Duties and Responsibilities

• Direct the installment and wiring of the robots on site; cooperate with team to fix problems arisen on site
• Configure the auxiliary equipment of robots; work with team to integrate robots with the whole line
• Program robots for applications of sorts, make robots working accurately and efficiently
• Fix robots problem in both of hardware and software
• Provide the customers with robots operation courses, and instruct them for regular maintenance